Click image to view full size image
FRP Pultrusion Die and Pultrusion Machine
GRP pultrusion machine, pultrusion die
GRP FRP pultrusion line
Automatic control GRP profile Pultrusion production line
High Quality FRP Extrusion Production line
The native way of clamping pressure type is upstroke and downstroke. Heating mode include plate heating type and heating jacket type, which can be selected according to different materials.
Traction system of pultrusion machine
There are many style for the traction system of pultrusion machine. now commonly used for upstroke type and downstroke type. this traction system work as the four pillar type traction system, whicah clamping longer and mor ideal for some special material production.
Sliding guide ,linear rolling guide
The movement components for pultrusion machine clamping have two types.one is sliding guide rod, the other one is linear rolling guide. Guide rod type is simple, low cost, convenient for production. Rolling linear guide precision is higher, which structure is complex, its runtime friction resistance is small,high mechanical efficiency.
Pultrusion machine hydraylic system
Pultrusion machine hydraylic system configuration requirements are different from the production materials are regional difference. it is based on the requirements of material production. Due to eh pultrusion machines continuous production, which oil temperature should be high. the machine must be cooling controlled. in the aspect of cooling system, there are water cooling syetem and wind cooling system.
Heating system
The heating system of the pultrusion machine can be divided into heating plate heating and heating jacket heating.currently heating plate mode has been mostly adopted. due to the heating plate can be installed a few same height moulds at the same time, to improve and extension the capacity of pultrusion machine. heating jacket heater is used for single moule productionb or two moulds at most.
GRP pultrusion machine, pultrusion die
GRP FRP pultrusion line
Automatic control GRP profile Pultrusion production line
High Quality FRP Extrusion Production line
The native way of clamping pressure type is upstroke and downstroke. Heating mode include plate heating type and heating jacket type, which can be selected according to different materials.
Traction system of pultrusion machine
There are many style for the traction system of pultrusion machine. now commonly used for upstroke type and downstroke type. this traction system work as the four pillar type traction system, whicah clamping longer and mor ideal for some special material production.
Sliding guide ,linear rolling guide
The movement components for pultrusion machine clamping have two types.one is sliding guide rod, the other one is linear rolling guide. Guide rod type is simple, low cost, convenient for production. Rolling linear guide precision is higher, which structure is complex, its runtime friction resistance is small,high mechanical efficiency.
Pultrusion machine hydraylic system
Pultrusion machine hydraylic system configuration requirements are different from the production materials are regional difference. it is based on the requirements of material production. Due to eh pultrusion machines continuous production, which oil temperature should be high. the machine must be cooling controlled. in the aspect of cooling system, there are water cooling syetem and wind cooling system.
Heating system
The heating system of the pultrusion machine can be divided into heating plate heating and heating jacket heating.currently heating plate mode has been mostly adopted. due to the heating plate can be installed a few same height moulds at the same time, to improve and extension the capacity of pultrusion machine. heating jacket heater is used for single moule productionb or two moulds at most.
| Items / Type | ZLRCYZ -3 | ZLRCYZ -6 | ZLRCYZ -10 | ZLRCYZ -12 | ZLRCYZ -15 | ZLRCYZ -25 | ZLRCYZ -40 |
| Puling Force (Tons) | 3 | 6 | 10 | 12 | 15 | 25 | 40 |
| Clamping Force (Tons) | Manual | 6 | 10 | 12 | 15 | 25 | 40 |
| Puling Speed (m/min) | 0.1-1.4 | 0.1-1.5 | 0.1-1.5 | 0.1-1.5 | 0.1-1.5 | 0.1-1.2 | 0.1-1.2 |
| Envelop (W*H)m | 0.25*0.07 | 0.6*0.15 | 0.6*0.25 | 0.7*0.3 | 0.8* .35 | 1*0.5 | 1.2*0.5 |
| Motor Cahacity (kW) | 2.2kW | 2*3 kW | 2*4 kW | 2*5.5 kW | 2*7.5 kW | 2*7.5 kW | 2*11 kW |
| Heating capacity (kW) | 9.6 | 9.6 | 9.6 | 12 | 14.4 | 18 | 18 |
| Heating board size (L*W)m | 0.85*0.4 | 0.85*0.6 | 0.85*0.6 | 0.85*0.6 | 0.85*0.7 | 0.9*0.8 | 0.9*1.2 |
| Dimensions (L*W )m | 6.2*1.2 | 8.3*0.85 | 8.4*0.9 | 10*1.0 | 11*11 | 11*1.3 | 11.5*1.54 |
| Total Weight (Tons) | 1.2 | 3 | 3.5 | 4 | 4.5 | 6 | 7 |
| Transmit Type | Mechnicaldrve | Hydraulic | |||||